KitchenAid KPEXTA Instructions And Recipes Manual page 6

3.
To Assemble Pasta Press Accessory
Place the pasta ring (D) over the plate
and gently turn by hand until finger
tight but not over tightened.
A multipurpose combo tool (L) with a
hook and wrench is provided. The flat end
may be used to help push dough into the
press. The wrench may be used to loosen
the pasta ring from the press body. The
hook may be used to pry the auger out of
the casing.
4.
qsert tne cutter _B) into tne SOCKeI,
aligning tne flange with tne eft side of
the slot as snown. Push in until OCKeC
into place anc turn cutter to tne -_gqI.
The pasta press is now ready to attach
to the Stand Mixen
TURN AFTER
INSERTING
INTO SOCKET
FLANGE
¸iili '¸
A storage case (E) is provided to store
pasta plates (F, G, H, I, J and K).
NOTE: Do not use combo tool to
tighten pasta ring.