To Assemble Pasta Pressaccessory - KitchenAid KPEXTA Instructions And Recipes Manual

To Assemble Pasta Press Accessory
KitchenAid
C
A
' D
B
A- Housing
B - Cutter
C - Auger
D- Pasta Ring
E - Storage Case
1.
ili!il
:iii!
i Yi
F
% _i _>'_
G
J
H ;_
_ _ K
F - Spaghetti Plate
G- Bucatini Plate
H - Rigatoni Plate
I - Fusilli Plate
J - Large Macaroni Plate
Place the press upside down on a
counter or table, and insert the end
of the auger with the cross-shaped
peg (C) into the press housing (A),
aligning the cross-shaped peg with the
matching indentation inside. When
correctly positioned, the top of the
auger will be flush with the opening.
M
K - Small Macaroni Plate
L - Combo Tool
M- Cleaning Brush
2.
Place one of the pasta plates (F, G, H,
I, J or K) over the opening, aligning its
center with the auger, matching the
tabs of the plate with the notches in
the press housing.
Continued on next page.
3