Anti Junk Fax - Sharp FO-165 Operation Manual

The Anti Junk Fax function allows you to block reception of faxes from parties
which you specify. This saves paper by not printing out unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 16 to YES as described
in Chapter 6, and then enter the fax numbers from which you do not want to receive
faxes as shown below.
Comments:
. Up to 5 numbers can be entered in the Anti Junk Number List.
. To clear a number from the Anti Junk Number List, you need to know the 1-digit
number which identifies it. If you have forgotten this number, print out the Anti
Junk Number List as described in Chapter 7.
1
Press the keys shown at left, "STORE
FuN~oN ~ ~
JUNK FAX #" will appear in the display
2
Press "1" to store a number in the Anti
a or ~
Junk Number List, or "2" to clear a num-
ber from the list.
3
Storing: Enter a 1-digit number from "l"
m
to "5". This number identifies the fax
number you will store in the next step.
Clearing: Enter the number which iden-
(Example)
tifies the fax number you want to clear,
and go to Step 5.
4
Enter the fax number (max. of 20 digits).
mmaaamm
(Example)
5
START
=
Press the START key
~ @
6
STOP
Return to Step 3 to enter (or clear) an-
Step 3 or
o @
other number. or press STOP to exit.
SPECIAL FUNCTIONS
5-1