Sharp FO-165 Operation Manual page 2

WARNING — AUSTEL regulations state that no unauthorised changes
or modifications to this equipment are permitted.
Note: Complies with AUSTEL and NZ TELECOM standard
AS/NZS3548 regarding emission of electromagnetic interference.
These limits are designed to provide reasonable protection against
interference in an installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause interference. However.
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or
television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—
Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and the receiver.
— Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
— Consult the dealer or an experienced radioflV technician for help.
FOR YOUR RECORDS
Please record the model number and serial number below. for easy reference.
in case of loss or theft. These numbers are located on the rear side of the unit.
Space is also provided for other relevant information.
Model Number
Serial Number
Date of Purchase
Place of Purchase