Sharp FO-165 Operation Manual page 24

STORING NUMBERS FOR AUTOMATIC DIALING
1 Press the keys shown at left "FAXflEL. F"~oN ~ ~
# MODE" will appear in the display.
Press "2" to select CLEAR
3
'0 'm
Enter the Speed Dial number tha[ you
want to clear by pressing the number
(Example)
keys.
4 'TART
a
Press the START key
j @
5
STOP
Return to Step 3 to clear another num-
Step 3 or
o @
ber, or press STOP to exit.
To make changes in a number previously stored, repeat the storing procedure.
Select the code number for which you want to make changes in Step 3. and then
change the number and/or name when they appear in the display (Steps 4 and 6.
respectively).
Numbers and letters are changed as described in "Entering letters for names" in
%is chapter.
+ A lithium battery keeps automatic dialling numbers in memory
Your fax uses a lithium battery to keep automatic dialling numbers and other
programmed data in memory when the power is turned off.
Battery power is consumed primarily when the power is turned off. With the power
kept continuously off, the life of the battery is about 5 years.
If the battery fails, have your dealer or service centre replace it. Do not try to
replace it yourself.
2-12 INITIAL SETTINGS