Sharp VL-C8000X Operation Manual page 7

Hide thumbs Also See for VL-C8000X:
Table of Contents

Advertisement

13
Sub REC START/STOP button
Press to start recording. Recording will be paused if
pressed during the recording mode.
Use when recording from a low angle.
TRACKING 4
control button [23]
DATE/TIME SET button m
c l 15
TRACKING b control button [23]
DATE/TIME SELECT button m
c l
16
DATE/TIME INITIAL button m
17
Power Zoom Wide/Telephoto control button
Maximum telephoto with T rele) depressed (this is
also called "zoom-in" or "zoom-up"). Maximum
wide angle with W (Wide) depressed (this is also
called "zoom-out" or "zoom-down").
You can vary the speed of the zoom from 6
seconds to 20 seconds by the degree of finger
pressure on the Zoom buttons.
Battery Pack Compartment
19
External microphone jack
Eyelet tabs
Pull the shoulder strap through these eyelet tabs
and adjust the length of the strap with the buckle.
21
DC input jack
22
COUNTER/COUNTER MEMORY/LAP TIME
button
Used to select among Counter, Counter Memory,
and Lap Time modes being indicated in the view-
finder.
COUNTER/LAP TIME RESET button
23
Used to reset the Counter and Lap Time being indi-
cated in the viewfinder.
24
REC START/STOP button
Press to start recording. Recording will be paused if
pressed during the recording mode.
25
Grip Strap
c l
26
Battery release lever
c l
Used to attach/detach the battery.
SELF TIMER button/Talent Tally indicator
27
The Talent Tally indicator will light up when the Cam-
corder begins recording, enabling the subject to
determine whether the unit is recording or not. The
SELF-TIMER button and Talent Tally indicator share
the same function. When the button is pressed in
the REC Pause mode, the indicator will blink for 10
seconds before the Self-timer starts recording.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quick zoom 12 vl-c8000x

Table of Contents