Forward/Reverse Search And Still - Sharp VL-C8000X Operation Manual

FORWARD/REVERSE SEARCH AND STILL

To quickly locate a point on a recorded tape, use the Forward and Reverse Search buttons.
Forward Search
Press the FF( @I) button during playback. This
speeds playback up to 3 times faster than normal for
an SP recorded tape and 7 times faster for an LP
recorded tape.
Reverse Search
Press the REW( @I) button during playback. This
speeds up reverse playback to 3 times faster than
normal for an SP recorded tape and 7 times faster
for an LP recorded tape.
There may be some picture noise during Forward/Reverse Search. This is normal. If the TV picture roils vertically, adjust
the TV vertical hold control. The picture may go monochrome during Forward/Reverse Search on a recorded tape. This
is normal. Audio will not be heard.
Still
Press the PAUSE/STILL button during playback to still
the picture. To resume playback, press the PAUSE/
STILL button again.
If the TV picture rolls vertically, adjust the TV vertrcal hold
control.
To protect the tape, the Camcorder releases the tape
tension and resumes STOP mode when left longer than 5
minutes in STILL mode during playback.
24