Table of Contents
Advertisement
Caution:
Check the tape condition after inserting the cassette and
tape loading is completed:
1. Check to see if there is any tape slack.
(Do not open the tape cover.)
remove it by turning
2. If there is tape slack,
direction of the arrow.
During tape loading and unloading, do not touch this
reel for safety and tape protection.
Playing Back the Tape
1.
Load the cassette adaptor into a VHS deck in the
same way as you would load a regular VHS tape.
2.
Operate the VHS deck as usual.
*Note
that playback special
formed using the VHS deck.
if noise bars appear, adjust the tracking of the
l
playback deck. Be sure to reset the tracking
control
to its normal position when you have
finished playing back compact VHS tapes.
Consult the VCR's operation manual for operation
l
instructions.
During special effects playback (slow motion, still frame,
l
etc.) the picture may vibrate or noise bars may appear
on the screen.
l
The protruding safety catch Indicates that loading of the
tape has not been completed. In this condition, NEVER
attempt to load the cassette adaptor Into a VCR, as this
could damage both.
VCR repeatedly without allowing the tape to run. Thts will
slacken the tape and thereby damage rt.
30
Removing the Compact Video
Cassette
Slide the latch to open the door, then push up on the
cassette to remove it, pushing on the cassette with
reel in
the
the
your finger through the hole in the bottom of the
adaptor.
Tape cover
This cassette adaptor is precision-manufactured. Avoid
l
violent vibrations or shocks. Do not drop or disassemble
or modify it, otherwise malfunctions may result.
When placing the cassette adaptor into its case, slide the
l
cassette
Video Cassettes
The VL-C8OOOX employs only compact video cassettes
l
carrying the 'wq mark.
erases the previously recorded video and audio
signals.
effects can be per-
without allowing the tape to run at all. This will
slacken the tape and thereby damage it.
*Make certain before loading the cassette that the
take upslack.
vent accidental erasure. When the tab is removed,
recording is impossible. If you wish to record on a
cassette whose tab has been removed, use adhe-
sive tape to reseal the slot.
prints, do not open the front tape cover.
Storage of Cassettes
l
Avoid
Keep them away from heaters.
places.
violent vibrations or shocks.
Place the
l
them vertically.
end first.
adaptor into the case, safety catch
slackened. If there is any slack, turn the
is not
avoid excessive exposure to dust and finger-
exposing the cassettes to drrect sunlight.
the cassettes in humid or dusty
cassettes to strong magnetk
motor, transformer or magnet).
cassettes in cassette cases
- -
and position
Advertisement
Table of Contents
