Panasonic AG-VP310 Operating Instructions Manual page 55

Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
Press ACTION
to display DVD MAIN MENU.
2
Press AV to select
"PROGRESSIVE OUT,"
and
press SET repeatedly
for mode. (See below.)
OFF: Progressive scan signal is not output.
ON: Progressive scan signal is output from the
Component Video Output Connector.
Press ACTION
to exit this mode.
You can set to preset audio/video effects as desired.
Press A/V OPTIMIZER
in Play mode to display
theA/V OPTIMIZER
selection on-screen.
• Display disappears after
B seconds.
Press A/V OPTIMIZER
to select the desired
mode below.
O
• If the television is not progressive
compatible, a progressive scan picture is
not available. Connect the Video Output or
S-Video Output connector (see p. 12, 13)
and set PROGRESSIVE OUT to "OFF".
• CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE
OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED
TO SET PROGRESSIVE OUT TO "OFF".
IF THERE ARE QUESTIONS
REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL
525p DVD/VCR DECK, PLEASE
CONTACT OUR CUSTOMER SERVICE
CENTER.
@@0® _
o;;o
-- ACTION
SELECT
AY
SET B
x A/V
OPTIMIZER
The video/audio effect of each mode is listed below.
Mode Video Audio
NORMAL Standard video Standard audio
Enhances high/low range for
CINEMA Bright areas are subdued.
dynamic sound.
Reduces high/low range so dialog
DRAMA Standard video and vocals can be heard clearly.
Brightness and sharpness are Enhances high/low range for
ACTION enhanced, dynamic sound.
O
• With some discs, the audio/video effect may not be obtained, also the audio/video
effects may not work well,
55