Panasonic AG-VP310 Operating Instructions Manual page 16

Dvd/vcr deck

Hide thumbs Also See for AG-VP310:

Turn TV on.

See connections (_) RF Coaxial Cable Connection and (_)AV Cable Connection on page 12.

Set TV to channel 3.

Set TV to VIDEO.

[DECK + TV]

• Go to "initial Setup (Ready to Play)." (See below.)

[Cable Box --,- DECK ÷ TV], [DSS ÷ DECK ÷ TV]

• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel

in your time zone.

• If you use a DSS Receiver, it must be turned off.

Press VCR

for VCR mode.

remote

Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel

and clock set starts.

• If screen below does not appear, check DECK - TV connection and, if TV is tuned to

channel 3, try switching it to channel 4.

• To change VCR's output channel, please see "VCR's Output Channel" on page 19.

Plug VCR Power plug

into an AC wall outlet.

AUTO

CLOCK

SET

PROCEEDING

CANCEL:STOP

• Function buttons are void during Initial Setup.

• To eject a tape during Auto Set, press EJECT on remote

or STOP/EJECT twice on DECK.

Then make settings manually. (See p. 18.)

• If Auto Clock Set takes more than 30 minutes,

press STOP and perform settings manually. (See p. 18.)

Con tin ued on next page...