Panasonic AG-VP310 Operating Instructions Manual page 28

The Remote Control can be set to control some TVs.
Find your TV Brand Code Number on the
following page.
• Set up for TV control,
÷ hold down TV button,
÷ enter code with NUMBER keys.
Confirm code entry,
,- press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
O • Repeat setup after remote battery replacement.
• Remote will not control every TV made by the
manufacturer listed. If you get no response, your
particular unit cannot be controlled.
There are NO additional codes for the products
listed. If your product is not listed, then the
remote is not compatible with that product.
_vA trl [tl :]"i_1'; I [_]'_]11F_ I
After remote is set up, you can select VCR, DVD, or TV
for the desired function.
Press VCR, DVD, or TV on the remote.
Table below shows available remote buttons for each mode.)
DVD/VCR TV
DVD
All VOL +/-
VCR
"rv
EJECT/OPEN/CLOSE*,
DISPLA Y, PLA Y, STOP,
FF/SLOW+, REW/SLOW-,
VCR/TV, PAUSE/STILL, SKIP,
AUDIO, CM/ZERO, SPEED, REC,
TAPE POSITION, PAGE,
COUNTER RESET
POWER, INPUT, NUMBER keys,
ENTER, CH A/V, VOL 4-/-
* Bold: VCR Function
Italic: DVD Function
Bold Italic: VCR and DVD Functions
Normal: TV
• Not all functions listed may be controllable.
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys
for channel selection.
28