Table of Contents
Advertisement
As an ENERGY STAR
of America has determined that this product or product model
meets the ENERGY STAR
Please read these instructions carefully before attempting to connect, operate, or adjust this product.
Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television)
mode. If not using CATV, set this menu option to the "TV" position.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Operating Instructions
Model No.
*Ability to play back may depend on recording conditions.
®
Partner, Matsushita Electric Corporation
®
guidelines for energy efficiency.
DVD/VCR DECK
PV-D734S
PV-D744S
Advertisement
Table of Contents
Related Manuals for Panasonic PV-D744S
Summary of Contents for Panasonic PV-D744S
- Page 1 When shipped from the factory, the TV/CATV menu option is set to the “CATV” (Cable Television) mode. If not using CATV, set this menu option to the “TV” position. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Operating Instructions Model No.
- Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
-
Page 3: Important Safeguards
1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. - Page 4 IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
- Page 5 25. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 26. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.
-
Page 6: Disc Information
Disc information Discs that can be played Discs that can be played Disc Disc formats supported by this Disc type Logo unit DVD-Video • DVD-Video format • CD-DA format CD-DA CD-R • CD-DA format • MP3 and JPEG file (finalized*) CD-RW •... -
Page 7: Table Of Contents
Before using your unit IMPORTANT SAFEGUARDS ... 3 Disc information ... 6 Contents ... 7 Parts and functions ... 8 Display ... 9 Remote control ... 10 Power source ... 11 Basic connections ... 12 CATV (CABLE TV) connections ... 14 Playback connections ... -
Page 8: Parts And Functions
Parts and functions Front Discs that can be played VCR/DVD mode selector button Cassette Loading Slot POWER CHANNEL VIDEO IN 2 L– AUDIO IN 2 – R CHANNEL POWER button buttons AUDIO (L/R)/ VCR indicator VIDEO IN jacks (LINE 2) Rear DVD COAXIAL DIGITAL AUDIO OUT jack... -
Page 9: Display
Display window Display When this unit and the TV are only connected by a coaxial cable, pressing the TV/VCR button on the remote control makes this display appear. Playback (lights) / Auto resume (flashes) Still picture DVD disc is inserted. CD is inserted. -
Page 10: Remote Control
REPEAT A-B See page 40 TV control buttons Notes: Only Panasonic TVs can be operated using this remote control. There may be some TV models that cannot be operated with this remote control. If this is the case, use the original remote control supplied with the TV. -
Page 11: Power Source
Inserting Batteries Open the battery compartment cover. Battery precautions The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. -
Page 12: Basic Connections
Basic connections If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber, skip ahead to page 14 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. - Page 13 DVD/VCR TO TV CONNECTION After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram.
-
Page 14: Catv (Cable Tv) Connections
CATV (CABLE TV) connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception. - Page 15 IMPORTANT: Make sure the TV/CATV menu option is set to the “CATV” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment.
-
Page 16: Playback Connections
Playback connections The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Connect to a TV with Audio/Video Output You can enjoy playback by connecting the unit to a TV. - Page 17 Connect to a Stereo Amplifier with Audio Output You can enjoy high quality audio by connecting the audio output to your amplifier. Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier. DVD/VCR Audio (L) Output Audio (R) Output...
-
Page 18: Auto Clock Setting
Auto clock setting The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel signal. NOTES: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the... - Page 19 Daylight Saving Time setting You can set the Daylight Saving Time “ON” or “OFF”. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) Repeat the step 1 on page 18 and press SET + or –...
-
Page 20: Manual Clock Setting
Manual clock setting You must set the date and time for timer recordings and Daylight Saving Time if the Auto Clock process did not set them correctly. NOTE: After a power failure or disconnection of the power, the timer settings will be lost. -
Page 21: Setting The Video Channel
Setting the video channel / Setting the language Setting the video channel To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). NOTE: When shipped from factory, the video channel is set to CH 3. -
Page 22: Tuner Setting
Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. -
Page 23: To Add/Delete Channels
To ADD/DELETE channels / Weak signal display Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) To ADD/DELETE channels You can add the channels you want or delete the channels you do not want manually. -
Page 24: Loading And Unloading A Cassette Tape
Loading and Unloading a cassette tape Use only video cassette tapes marked Loading Push the center of the tape until it is automatically inserted. Automatic power ON When you insert a cassette tape the VCR power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. -
Page 25: Cassette Tape Playback
NOTES: • This VCR selects the playback tape speed SP, LP or SLP automatically. • The Cassette tape and DVD disc can be played back simultaneously. If you press VCR/DVD, the tape playback and DVD playback alternate with each other on the screen. Cassette tape playback Preparation: •... -
Page 26: Special Playback
Special playback Picture Search Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press FF x 1 or x 2 during the playback. To return to playback: Press PLAY. SPEED SEARCH TIMES PICTURE SEARCH SPEED TAPE SPEED PRESS ONCE... -
Page 27: Zero Search Function
ZERO SEARCH function / Video index search system NOTES for Counter Display: • If you rewind the tape beyond “00:00:00”, a minus sign (“–”) will be displayed in front of the time. • When you load a tape, the counter will reset to “00:00:00”. -
Page 28: Recording A Tv Program
Recording a TV program Recording and viewing the same TV program. NOTES: • If the erase prevention tab is removed, the tape will eject when REC/OTR is pressed for recording. • If you wish to watch the DVD playback during the normal recording on VCR, press VCR/DVD to change to DVD mode and perform the DVD playback (see page 36). - Page 29 Auto Rewind feature This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape. To stop recording Press STOP to stop recording. “ ” will appear on screen for about 4 seconds.
-
Page 30: One-Touch Timer Recording (Otr)
One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. NOTE: If you wish to watch the DVD playback during the OTR, press VCR/DVD to change to DVD mode and perform the DVD playback (see page 36). -
Page 31: Timer Recording
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 pro- grams within 1 month. NOTES: • If the clock symbol( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply. - Page 32 Timer recording Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA: Monday to Sat- urday) Timer recording Follow the procedure of timer recording on the previous page. At picture 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER. When you press SET –...
-
Page 33: Stereo Recording And Playback
Stereo recording and playback / Second Audio Program (SAP) NOTES: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. • When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural. -
Page 34: Duplicating A Video Tape
Duplicating a video tape If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. Load a blank cassette tape with the erase preven- tion tab intact into the recording VCR. Load a previously recorded tape into the playback VCR or CAMCORDER. -
Page 35: Setting Setup Language
Setting setup language/Progressive scan mode If the DVD/VCR does not operate properly: Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. Preparation: • Turn ON the TV and set to the video input mode. -
Page 36: Playback Procedure
Playback procedure NOTES: • If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (See pages 6 and 47). •... -
Page 37: Special Playback
Note: There may be a slight delay between pressing the button and the function activation. NOTE: The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an ex- tended period of time, you risk permanent damage to your television screen. -
Page 38: Zooming
Zooming/Locating desired scene NOTE: You can use the Pause, Slow, Search or Skip feature in the zoom mode. Preparation: Turn ON the TV and set to the video input mode. • • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Zooming This unit will allow you to zoom in on the frame image. -
Page 39: Marking Desired Scenes
The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. NOTES: • Some discs may not work with the marking operation. • The marking is canceled when you open the disc tray or turn the power off. -
Page 40: Repeat Playback
Repeat playback NOTES: • Some discs may not work with the repeat operation. • In A-B repeat mode, subtitles near point A or B may not appear. • During the A-B Repeat Playback the ANGLE feature will not operate. • You may not be able to set A-B Repeat, depending on the scenes of the DVD. -
Page 41: Program Playback/Random Playback (Cd)
Program playback/Random playback (CD) NOTES: • To cancel program play, select “Clear” at step 4 and press ENTER. • The program is cancelled when you open the disc tray or turn the power off. • Program playback/Random playback can not be combined with Repeat playback. -
Page 42: Changing Soundtrack Language
Changing soundtrack language / Subtitles / Karaoke playback NOTES: • If the desired language is not heard after pressing the AUDIO button several times, the language is not recorded on the disc. • Changing soundtrack or subtitle language is cancelled when you open the disc tray. The initial default language or available language will be heard and seen if the disc is played back again. -
Page 43: Changing Angles
Changing angles / Title selection / DVD menu NOTE: Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the disc, or you may be unable to select the title, and a “title menu” may simply be called a “menu”... -
Page 44: Mp3/Jpeg Playback
MP3/JPEG playback This unit can play back MP3/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play back due to the condition of the recording. MP3/JPEG CD information Limitations on MP3/JPEG CD playback •... - Page 45 NOTE: The picture menu is displayed when the FUJICOLOR CD or the Kodak Picture CD are played. To display the file menu press TITLE. Preparation: • Turn ON the TV and set it to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) JPEG playback Repeat the steps 1~3 on page 44.
- Page 46 MP3/JPEG playback Preparation: • Turn ON the TV and set it to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Setting the JPEG Slide-show You can continuously play back all JPEG files automatically as a slide-show.
-
Page 47: Parental Control
Some discs are specified not suitable for children. Such discs can be prevented from play back with the unit. NOTES: • If each setup (pages 46~54) has been completed, the unit can always be worked under the same conditions (especially with DVD discs). Each setup will be retained in the memory if you turn the power off. -
Page 48: Temporary Disabling Of Rating Level By Dvd Disc
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. NOTE: This temporary cancellation of rating level will be kept until the disc is ejected. -
Page 49: Setting Menu Language
You can select the language of the disc menu messages of DVDs. Setting menu language Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Press SETUP in the stop mode. -
Page 50: Setting Subtitle Language
Setting subtitle language The same subtitle language can always be selected even if you replace the disc or turn the power off. NOTE: If the selected language is not recorded on the disc, the first-priority language is selected. Preparation: • Turn ON the TV and set to the video input mode. -
Page 51: Setting Audio Soundtrack Language
The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. NOTE: If the selected language is not recorded on the disc, the original language will be heard. Setting audio soundtrack language Preparation: •... -
Page 52: Setting The Aspect Ratio Of Tv Screen
Setting the aspect ratio of TV screen You can select the aspect ratio for your TV. NOTE: If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style. Preparation: • Turn ON the TV and set to the video input mode. •... -
Page 53: Setting On Screen Display
Setting on screen display/Status display of disc Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Setting on screen display On screen display can be switched on or off when you press the DISPLAY button. -
Page 54: Dynamic Range Control
Dynamic Range Control DRC (Dynamic Range Control) ena- bles you to control the dynamic range so as to achieve a suitable sound for your equipment. NOTES: • This function works only during playback of Dolby Digital recorded discs. • The level of Dynamic Range Reduction may differ depending on DVD video disc. -
Page 55: Language Code List
Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (see pages 49-51). Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji Afar 1111 Finnish Afrikaans 1116 French Albanian 2927 Frisian Amharic 1123 Galician Arabic... -
Page 56: Problems And Troubleshooting
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS DVD/VCR DVD/VCR does not operate. -
Page 57: Built-In Head Cleaner (Model Pv-D744S Only)
If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262). To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com. Built-in head cleaner (Model PV-D744S only) A clean video head helps produce a clear picture. -
Page 58: Specifications
Specifications GENERAL AC 120V 60Hz Power supply: Operation: 18W Power consumption: Stand by: 2W Weight: 3.6 k Dimensions: Width : 430 mm (16-15/16 inches) Height : Depth : 250 mm (9-13/16 inches) Inputs/Outputs: Video: In: 1Vp-p/75 ohm Out: 1Vp-p/75 ohm Audio: In: –8dBm/50k ohm Out: –8dBm/1k ohm... -
Page 59: Spanish Quick Use Guide (Guía Para Rápida Consulta)
Spanish Quick Use Guide (Guía para rapida consulta) Conexiones basicos El DVD/VCR debe conectarse “entre” la antena y el televisor. Primero, desconecte la antena del televisor y conéctela al DVD/VCR. Luego, conecte el DVD/VCR al televisor. Una vez que haya conectado la antena al DVD/VCR, usted tendrá que conectar el DVD/VCR al televisor. Cable coaxial de 75 ohmios Conexiones de TV cable (CATV) Muchas compañías de TV cable ofrecen servicios que permiten recibir canales adicionales, incluyendo... - Page 60 Spanish Quick Use Guide (Guía para rapida consulta) Ajuste del reloj manual (continuacion) Una vez ajustado el reloj, la fecha y la hora empiezan a funcionar automáticamente. Ajuste del canal de video Para vizualizar la reproducción de una cinta grabada, o para ver un programa seleccionado por el selector de canal del videograbador, el televisor deberá...
- Page 61 Spanish Quick Use Guide (Guía para rapida consulta) COLOCACION Presione en el centro del videocassette hasta que se retraiga automáticamente. EXTRACCION Presione el botón EJECT del DVD/VCR o cotrol remoto. Extraiga el videocassette. PARA INICIAR LA REPRODUCCION Presione el botón PLAY. La reproducción comenzará.
- Page 62 Spanish Quick Use Guide (Guía para rapida consulta) Grebacion por temporizador de un solo toque (OTR) EJEMPLO: Una grabación por temporizador de un solo toque para 30 minutos. Coloque un cassette con lengüeta protección contra borrados accidentales esté intacta. El DVD/ VCR se encenderá...
- Page 63 Spanish Quick Use Guide (Guía para rapida consulta) Ajuste de la selección de idioma Presione SETUP en el Language Picture modo de parada. El MENÚ DE AJUSTE de DVD aparecerá en pantalla. Presione para seleccionar other. Presione o ENTER Language Picture para seleccionar OSD OSD Language English Language.
-
Page 64: Limited Warranty
Limited Warranty Panasonic DVD/VCR Deck Limited Warranty Limited Warranty Coverage Product or Part Name Mail-In Service Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHSE. -
Page 65: Customer Services Directory
For hearing or speech impaired TTY users, TTY : 1-866-605-1277 Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787)750-4300 Fax (787)768-2910... -
Page 66: Index
Index Accessory ... 7 Add/Delete Channels ... 23 Angle ... 43 Aspect Ratio of TV Screen ... 52 Audio CD ... 6,41 Auto CH memory ... 22 Auto Clock ... 18 Auto Repeat ... 26 Auto Rewind ... 29 Automatic Playback ... 24 Automatic Power On ... - Page 67 Remote Control ... 10 Repeat Playback ... 40 Review Playback ... 26,37 Rewind ... 25 Second Audio Program (SAP) ... 33 Slide-show ... 46 Slow Motion ... 26,37 Spanish Quick Use Guide ... 59 Specifications ... 58 Standard Time ... 18 Stereo Recording and Playback ...
- Page 68 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985...