Removing The Face Up Tray - Epson EPL-N1600 Reference Manual

2. Pull the center grip of the face-up tray to open the large part
of the tray extension. If you need to use the small part of the
tray extension, flip this out as well.
You select face up or down print out either through the printer
driver software, or through the printer's control panel.
Using the printer driver:
Check the Face Up check box on the Basic Setting menu (except
Windows NT 3.51) or Document Setting menu (Windows NT
3.51) of the printer driver.
Using SelecType:
Follow the instructions in the section on SelecType to change this
setting. You should use the Printing menu for this ("Out Bin", page
5-18).

Removing the Face Up Tray

Follow the instructions below to remove the face-up tray.
1. If the small part of the tray extension is extended, flip it closed.
Push the large extension so that it retracts into the face-up
tray.
3-30
Options