Setting
RITech
Toner Save
Density
Top Offset
Left Offset
Top offset B
Left offer B
Size Ignore
Auto Cont
Page Protect
Image Optimum
Setup menu
This menu allows you to set up various parameters, mainly
concerned with the printer hardware.
Interface
When this is set to Auto , the printer automatically receives data
from any interface to which you have connected a computer. If
set to any other value, the printer only accepts data from the
interface which you have selected here.
Time Out
Sets the length of time that the printer waits when it is on line and
no new data is received. When this time is up, the printer searches
for new print data on other print channels (interfaces).
5-24
SelecType
Parameters
On, Off
Off, On
1, 2, 3, 4, 5
-99.0 – 0.0 – 99.0 mm in 0.5 mm steps
-99.0 – 0.0 – 99.0 mm in 0.5 mm steps
-99.0 – 0.0 – 99.0 mm in 0.5 mm steps
-99.0 – 0.0 – 99.0 mm in 0.5 mm steps
Off, On
Off, On
Auto, On
Auto, Off, On