Table of Contents
Advertisement
TeamPoS 3000 XL and XL
Chapter 4 SITE PREPARATION
This chapter defines the following pre-installation details for the TeamPoS 3000:
• Shipment inspection and return
• Anti-static protection
• Electrical supply requirements
• Mains power cables
• Warning labels
• The procedures assume that in-store wiring for the terminals, its peripherals, and
terminal-to-terminal communications have been installed.
4.1
Unpacking/Inspecting the Shipment
TeamPoS Series terminals are thoroughly inspected prior to shipment; however,
damage can occur during transit. Any damage to the terminal can lead to problems
after installation. Before accepting a shipment, inspect all shipping containers for
external damage. Ensure that all packages listed on the shipment billing form have
been delivered.
• Verify that all the accessories listed on the packing list have been included in
the shipment.
instructions. Then
customer needs to provide the sales order number and a description of the piece
of equipment damaged. The customer should then telephone 1-800-780-5525
and a Customer Care representative will arrange for replacement. Customer
Care is not responsible for equipment damaged by the customer after it is
delivered.
• Inspect the exterior of each shipping box noting damage on the shipping
documents so that the carrier has a record.
from the box and check for damage. If the unit or components are damaged,
contact your Help Desk for instructions.
• Inspect the exterior of each unit for any obvious physical damage (scratches or
abrasions on painted or display surfaces, or on plastic surfaces) that could have
occurred during shipping.
• Damaged equipment received from a source other than Fujitsu Transaction
Solutions Inc.'s Foothill Ranch facility should be reported to the sender.
D900000145
2
If components are missing, contact your Help Desk for
report shortages and damage to Customer Care. The
Issue 3
Site Preparation
Remove the unit and components
4-1
Hide quick links:
Advertisement
Table of Contents
