Installation Tips - Acer Altos G540 Installation & Configuration Manual

Installation Tips

Make a driver diskette for LSI MegaRAID SAS 8300XLP and onboard Intel
1.
82563EB Gigabit Ethernet from EasyBUILD 7.1 build 200.
Boot the system from the NetWare 6.5 SP5 OS CD.
2.
At Welcome to the NetWare 6.5 server installation page, select Manual to
3.
install.
At Prepare boot partition page, create one 500 MB DOS partition.
4.
When you see the following message, please select Modify. Then, move
5.
the cursor to Storage adapters and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-----------------------
HotPlug Support Module
Storage adapters:
Please select IDEATA.HAM | Standard ATA/IDE RAID Adapter and press
6.
Delete to delete the module.
Then, press INSERT key to insert the LSI MegaRAID SAS 8300XLP driver.
7.
After the drivers are successfully loaded, you will see the driver listed as
following. Please select Return to driver summary.
Driver name
----------------------------------------------------
IDEATA.HAM | Standard ATA/IDE/ATAPI Adapter
MEGA_SAS.HAM| LSI MegaRAID SAS Adapter
Continue the installation.
8.
When you see the following message, please select Modify. Then, move
9.
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-------------------------
Network boards:
NetWare Loadable Modules:
Please press INSERT key to insert the onboard Intel 82563EB Gigabit
10.
Ethernet driver. After the drivers are successfully loaded, please select
87
Driver names
--------------
(optional)
IDEATA, IDEATA
Device name
Driver names
--------------
(optional)
Altos G540 Installation Configuration Guide
Status