Acpi Psm Module Update - Acer Altos G540 Installation & Configuration Manual

Please select LSIMPTNW.HAM and press Delete to delete the module.
6.
Then, press INSERT key to insert the LSI 1068 SAS driver. After the drivers
7.
are successfully loaded, please select Return to driver summary.
Continue the installation.
8.
When you see the following message, please select Modify. Then, move
9.
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-------------------------
Network boards:
NetWare Loadable Modules:
Please press INSERT key to insert the onboard Intel 82563EB Gigabit
10.
Ethernet driver. After the drivers are successfully loaded, please select
Return to driver summary.
Then, you would see the following message. Please select Continue.
11.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-------------------------
Network boards:
Network Loadable Modules:
Please follow the normal procedures to complete the NetWare 6.5
12.
installation.

ACPI PSM Module Update

NOTE. When you install the NW6.5 with the SP6 or later overlay CD, you DO
NOT need to update this ACPI PSM Module update. The SP6 or later can install
the ACPI driver correctly.
During installation the ACPI driver is not installed correctly. Please update the
ACPI PSM Module after the OS installation completed. You can find the update
on the Novell Website.
Please download the ACPI PSM Module update from the Novell website
1.
and extract it to a floppy disk.
Please load NWCONFIG from the server console.
2.
Select Product Option and Install a product not listed.
3.
85
Driver names
--------------
(optional)
Driver names
--------------
E1000E, E1000E
(optional)
Altos G540 Installation Configuration Guide