Gigabit Ethernet Driver Installation - Acer Altos G540 Installation & Configuration Manual

Please insert the EasyBUILD 7.1 build 200 into the optical drive
2.
Expand Drivers -> Altos G540 -> Chipset, select Windows Server 2003 x64
3.
and click on Setup.
Follow the instruction to install the driver and reboot the server after the
4.
chipset driver is installed.

Gigabit Ethernet Driver Installation

There are two Ethernet Controller listed under Other device in Windows
1.
Device Manager. They are the onboard Intel 82563EB Gigabit Ethernet
controller. You could find the driver in EasyBUILD 7.1 build 200. Please do
the same on both of the devices.
Right-click on the Ethernet Controller and select Update Driver.
2.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver. Please refer to the
6.
Directory on EasyBUILD in Driver required section for the path for the NIC.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) PRO/1000 EB Network
8.
Connection with I/O Acceleration listed in Network adapters.
25 Altos G540 Installation Configuration Guide