Connecting The Monitor, Keyboard, Mouse, And Ups; Introduction - HP D5970A - NetServer - LCII Guía Del Usuario

9 Connecting the Monitor, Keyboard,
Mouse, and UPS

Introduction

Use the procedures listed here to connect the peripheral devices to the
HP Netserver LP 1000r.
1. Connect the monitor, keyboard, and mouse to the HP Netserver LP 1000r
using the connections provided on the rear of the chassis. See Figure 9-1.
When connecting the Netserver to peripherals, use the cable ties and labels
provided with the product.
NOTE
Power Mouse
Keyboard USB (2)
NOTE
CAUTION
The two USB connectors are reserved for printers, scanners,
and external modems, but not the keyboard or mouse.
Parallel
LAN A/MGMT
Serial A/MGMT
Figure 9-1. Rear Panel Ports
If you have a console switch box, refer to the switch box user
guide for instructions on connecting the keyboard, mouse, and
monitor.
The Keyboard and Mouse ports are both PS/2 ports, but are
not interchangeable. If you plug the keyboard into the Mouse
port, or the mouse into the Keyboard port, you will get an
error message and the system will not finish the boot process.
LAN B PCI Slot (1)
Video External
SCSI Connector
83