C Harging The B Attery P Ack - Kenwood TK-2200L Instruction Manual

c
hArging the
The battery pack is not charged at the factory; charge it before
use.
Average battery pack life (calculated using 5% transmit time, 5%
receive time, and 90% standby time) is 7 hours.
ATTENTION: Always switch OFF a transceiver equipped with a
battery pack before inserting the transceiver into the charger.
1
Plug the AC adapter into an AC outlet.
2
3
Charging
slot
Indicator
8
B p
Attery Ack
Plug the AC adapter cable into the
jack located on the rear of the
charger.
Slide a battery pack or a transceiver
equipped with a battery pack into the
charging slot of the charger.
Make sure the metal contacts of the
battery pack mate securely with the
charger terminals.
The charger LED lights red and
charging begins.