C Hannel O Perating F Requencies - Kenwood TK-2200L Instruction Manual

c o
hAnnel perAting
To change the operating frequency of a channel:
1
Release the PTT switch and Side 1 key.
The transceiver announces Channel .
2
Pressing the Side 1 key or Side 2 key will toggle between QT,
DQT, and Channel setup.
3
4
F
reQuencieS
With the transceiver power OFF, press
and hold the PTT switch and Side 1 key
while turning the transceiver power ON.
Continue to hold the PTT switch and Side
1
1 key until the LED lights orange and the
transceiver announces Self .
Press and release the PTT switch, then
rotate the Channel selector to your
desired channel.
Upon pressing and releasing the PTT
1
switch, the transceiver announces
"Table zero".
Press the Side 1 key to increment the
Table number or the Side 2 key to
decrement the number, to select the
new channel frequency.
Press and hold the Side 1 or Side 2 key
to increment/ decrement the number by
5 at a time.
Table numbers and their corresponding
operating frequencies are provided in the
table on page 24.
A voice announcement will inform you of
the currently selected Table number.
23