Vox O Peration - Kenwood TK-2200L Instruction Manual

voX o
perAtion
Set up a VOX Gain level from 1 to 10 {page 14}.
1
To transmit, simply speak into the headset microphone.
2
You do not need to press the PTT switch; the transceiver
automatically detects your voice and begins transmitting.
To stop transmitting, stop speaking.
3
Transmission will continue momentarily after you stop
speaking, so ensure your transmission will not be cut off.
To exit VOX mode, set the VOX Gain level {page 14} to
4
OFF.
Note:
◆ While transmitting via VOX, all keys other than power OFF are
disabled.
◆ When you operate the VOX function, you must use an optional
KHS- or KHS-22 accessory.
◆ VOX will not operate when the battery level becomes too low. (The
LED will flash red in this state.)
6