Adjusting The Digital Audio Player Input Level - Kenwood R-K1 Instruction Manual

Playback of Digital Audio Player
The level of the input from the digital audio player connected to
the [D.AUDIO IN] connector can be adjusted. Adjust it so that the
audio from the digital audio player is played at a similar volume to
CD playback.

Adjusting the digital audio player input level

1 Perform steps
tal audio player" (see page 20.)
2 Enter the input level adjustment mode
3 Adjust the input level
22
EN
1 and 2 of the procedure in "Controlling the digi-
1 Press the MODE key
2 Select [Input Level]
Advance
Enter the
selection
\
Return
Increase
Enter the
selection
\
Decrease
PHONO MD TAPE
AUX D-IN 1 D-IN 2 DIMMER
TIMER
SLEEP
TIME/PTY
CLEAR DISPLAY
OPEN/
P.MODE RANDOM REPEAT CLOSE
MODE MUTE
AUTO/MONO DIRECT
TUNER CD D.AUDIO
BASS TREBLE FOLDER
PREV. NEXT
BALANCE
: Keys and controls used in the operation.
I n p u t
I n p u t L e v e l
÷ The input level display starts to blink. (Begin the level adjust-
ment within 20 seconds after the display appears.)
I n p u t L e v e l
÷ The level can be adjusted in three steps of -6, -3 and 0.
÷ When the input level is adjusted so that so that the audio from
the digital audio player is played at a similar volume to CD play-
back, the level of recording from the component connected to
the [D.AUDIO IN] connector is also adjusted. Therefore, do not
vary the input level in the middle of recording as this will vary
the recording level.
L e v e l
«
0
- 6