Adjusting The Digital Audio Player Input Level - Kenwood K-521 Instruction Manual

D.AUDIO D.AUDIO
46
K-521 K-521

Adjusting the Digital Audio Player Input Level

Use the procedure below to adjust the input level for the external compo-
nent connected to the [D.AUDIO IN] terminal.
Use this adjustment when the volume from an external component is notice-
ably higher or lower than other input sources at the same volume setting.
1 1
Press the [D.AUDIOE] key.
2 2
Press the [MODE] key.
3 3
Select "INPUT LEVEL".
Press the [C] or [D] key.
Press the [ENTER] key.
4 4
Adjust the Input Level.
Press the [A] or [B] key.
Press the [ENTER] key.
If you adjust the input level for D.AUDIO, the output level from the [AUX REC
OUT] terminal will also change.
You can adjust the input level in a
range from -3 to 5.