Playback Of Digital Audio Player; Controlling The Digital Audio Player; To Let It Playback Or Pause Temporarily - Kenwood R-K1 Instruction Manual

Playback of Digital Audio Player

When a Kenwood digital audio player is connected to the system
using the dedicated cable, the player can be controlled from this
system or the remote control unit.

Controlling the digital audio player

1 Connect a digital audio player
2 Switch the system and digital audio player ON
3 Start playback

To let it playback or pause temporarily

20
EN
Dedicated cable
To headphones jack
1 Select the [D.AUDIO] input
2 Press 6 /BAND key
PHONO MD TAPE
AUX D-IN 1 D-IN 2 DIMMER
TIMER
SLEEP
TIME/PTY
CLEAR DISPLAY
OPEN/
P.MODE RANDOM REPEAT CLOSE
MODE MUTE
AUTO/MONO DIRECT
TUNER CD D.AUDIO
BASS TREBLE FOLDER
PREV. NEXT
BALANCE
: Keys and controls used in the operation.
Both the system and digital audio player should be
switched OFF before connecting them.
÷ Using the dedicated cable, connect the [D.AUDIO IN] connec-
tor on the rear panel of the system and the headphones jack of
the digital audio player.
÷ After playing the digital audio player, be sure to disconnect the
connection cable.
÷ A commercially available stereo mini-plug cable can be used
for the connection. In this case, however, the input from the
digital audio player can be output from the system but the
player cannot be controlled from this system or the remote
control unit.
÷ Simply pressing the D.AUDIO 6 key on the remote control
unit selects the [D.AUDIO] input source and starts playback.
÷ Each press of the key switches the pause and play modes alter-
nately.