Cr_Hscale Command; Cr_Hpos Command; Cr_ Ceil Command; Cr_ Rear Command - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications
9.8.5

CR_HSCALE Command

Command "CR_HSCALE"[CR]
Details Get setting status of Horizontal Scale Store Mode
Acceptable
Response
%1
Unacceptable
9.8.6

CR_HPOS Command

Command "CR_HPOS"[CR]
Details Get setting status of Horizontal Position Store Mode
Acceptable
Response
%1
Unacceptable
9.8.7

CR_ CEIL Command

Command "CR_CEIL"[CR]
Details Get setting status of Ceiling
Acceptable
Response
%1
Unacceptable
9.8.8

CR_ REAR Command

Command "CR_REAR"[CR]
Details Get setting status of Rear
Acceptable
Response
%1
Unacceptable
9.8.9

CR_ COLBOARD Command

Command "CR_COLBOARD"[CR]
Details Get setting status of Colorboard
Acceptable
Response
%a
Unacceptable
"000_%1"[CR]
"-32" ~ "032"
"Error code"[CR]
"000_%1"[CR]
"-15" ~ "015"
"Error code"[CR]
"000_%1"[CR]
"ON" ---------------------- Ceiling ON is selected
"OFF" ----------------------Ceiling OFF is selected
"Error code"[CR]
"000_%1"[CR]
"ON" ---------------------- Rear ON is selected
"OFF" ----------------------Rear OFF is selected
"Error code"[CR]
"000_%a"[CR]
"OFF" -------------------- Off is selected
"RED" -------------------- Red is selected
"BLUE" -------------------- Blue is selected
"YELLOW" -------------------- Yellow is selected
"GREEN" -------------------- Green is selected
"BLACKBOARD" --------------------Blackboard is selected"
"Error code"[CR]
58/72