Installing Dos Software Only; Dos Printer Control Panel; Main Menu - NEC 1260 - SuperScript - Printer User Manual

Installing DOS Software Only

To install the SuperScript 1260 DOS software (for
example, if you don't use Windows), you can
manually copy the software from the "Printer
Drivers and Utilities" diskette to your hard drive:
1. From the DOS prompt, create a directory on
your hard drive for the DOS software (for
example: \necdos):
Type md c:\necdos and press
2. Change to the directory you have just created:
Type cd c:\necdos and press
3. Copy the SuperScript 1260 DOS program files
N1260CP.EXE, N1260CP.HLP and
N1260SM.EXE from the "Printer Drivers and
Utilities" diskette:
Type copy a:\n1260cp.exe and press
e
Type copy a:\n1260cp.hlp and press
e
Type copy a:\n1260sm.exe and press
e

DOS Printer Control Panel

The Printer Control Panel is a DOS program that
lets you change a number of printer settings, print
sample pages, and change the settings of the DOS
Status Monitor.
To run the Printer Control Panel:
e
The Printer Control Panel will run and you will be
e
at the Main Menu, described in the next section.

Main Menu

The Main Menu, which appears when you run the
Printer Control Panel, is used to access sub-menus
where you make changes to printer settings and
choose other options.
To select menu options from the Main Menu high-
light up and down with the keyboard arrow keys
and press
Installing DOS Software Only
From the DOS prompt,
type and press
n1260cp
e
.
e .
5-3