NorthStar EXPLORER 557 Installation And Operation Manual page 15

2-8-1 Multi window displays
The 557/567 can show two windows at once.
Adding a window to the display
Press , select Add window and select a
window to add. The 557/567 automatically
rearranges the display to show the new
window.
The active window
If there is more than one window displayed, the
active window is indicated by a red border. Press
twice to change the active window.
Chart is active
Gauges is active
Northstar Explorer 557/567 Installation and Operation Manual
Changing window size
1 Press
2 Press
windows.
Note: Some windows are fixed in size.
3 Press
Exchanging two windows on the display
1 Press
window.
2 Press
second window.
The 557/567 exchanges the two windows.
Replacing a window on the display
1 Press
window.
2 Press
window that is not currently visible.
Note: When some windows are small then not all
the data is shown.
Pressing
the active window.
Red border
Red border
and select Split ratio.
or to change the height of the
.
twice to change the active
, select Replace and select the
twice to change the active
, select Replace and select a new
will display the options menu for
15