Fuji Xerox Color J75 Press Service Manual page 776

Color J75/C75 Press
Ver.1.1
REP 18.3.1 MOB ADC Assembly
Parts List on PL 18.3
Removal
WARNING
Make sure that all jobs have been completed. Check that the
"Online" lamp is OFF and turn OFF the power.
After turning OFF the power of the machine, turn OFF the
breaker switch and unplug the power plug from the outlet.
1. Disconnect all cables that are connected to the Control part at
the left of the machine.
2. Remove the MSI. (REP 13.1.1)
3. Remove the Left Upper Cover. (PL 19.2)
• Installation screw: x2 at the left
4. Remove the Drum Cartridge. (REP 8.1.1)
5. Remove the first of the 2-tier stopper of the Rail and pull the
XERO/DEVE Drawer Unit further out. (Figure 1)
(1) Remove the first tier stopper.
(2) Pull the XERO/DEVE Drawer Unit further out.
Figure 1 j0pi40809
6. Remove the second of the 2-tier stopper of the Rail and
remove the XERO/DEVE Drawer Unit. (Figure 2)
(1) Remove the second tier stopper.
(2) Remove the Booklet Drawer Unit.
02/2013
4-88
Figure 2 j0pi40810
7. Remove the IBT Cleaner Assembly. (REP 6.3.2)
8. Remove the IBT Belt Assembly. (REP 6.3.1)
9. Push in the IOT Drawer Unit.
10. Push in the Drawer Unit.
11. Disconnect the connector. (Figure 3)
(1) Disconnect the connector.
Figure 3 j0pr41801
12. Lift up the MOB ADC Assembly and remove it. (Figure 4)
NOTE: The MOB ADC Assembly can be lifted up and removed
without having to remove the screw.
(1) Remove the MOB ADC Assembly.
Disassembly/Assembly and Adjustment
Figure 4 j0pi41803
Replacement
1. To install, carry out the removal steps in reverse order.
18. Electrical