Drivers - NEC VERSA DOCKING STATION 6000 Manual

Configure non-Plug and Play options according to the instructions that came
with the options and those in the NEC Versa user's guide. If you install non-
Plug and Play devices in a Plug and Play system, you must still configure
the option according to its requirements.
For some options, like a second IDE drive or diskette drive installed in the
docking station, you must run the Setup utility to set the correct parameters.
Some systems automatically detect the new device and its parameters. Check
that the settings reflect the options installed in the docking station.

Drivers

Windows 95 supports multiple configurations for your NEC Versa. Ver-
sions of MS-DOS above revision 6.0 also support multiple configurations.
After running the NEC Docking Station 6000 Setup utility, simply reboot
your system when docked or undocked and select the configuration to use
from the start-up menu.
Use the NEC Versa 6000 Setup utility to enable and disable SCSI drivers.
Access Setup when you boot the system and the prompt "Press <F2> for
BIOS SETUP" appears on your screen.
3-6 Setting Up and Using the Software