Removal - NEC VERSA DOCKING STATION 6000 Manual

Removal

Follow these steps to remove an expansion board from the docking station.
1.
Be careful not to drop anything into the docking station. Doing so
can damage the unit.
2.
Prepare for board removal as follows:
n
Disconnect and remove the NEC Versa from the docking station.
n
Turn off and unplug the docking station.
n
Disconnect any peripheral devices connected to the docking station.
n
Remove the docking station cover. See "Cover Removal" earlier in
this section for information on removing the cover.
n
Position the docking station so you have access to the side where the
expansion slots are located.
Remove the screw that attaches the board to the support bracket.
CAUTION
Removing the screw
Adding Options 4-11