Table of Contents
Advertisement
Docking/Undocking
2
the NEC Versa
HARDWARE SETUP
Getting your NEC Docking Station 6000 up and running is easy. This
chapter provides the procedures you need to get started. They include:
n
n
n
must set system parameters on the NEC Versa hard disk. You must
set docking station parameters on every hard disk drive that you
plan to use with the docking station. These procedures are de-
scribed in Chapter 3.
This chapter also describes how to undock the NEC Versa from the docking
station when you want to use the notebook by itself.
Connecting the Power Cable
Follow the instructions given next in the order presented to get your NEC
Versa and docking station up and running.
power before docking the computer.
Connecting the power cable to AC power and the docking station and
powering on the docking station.
Preparing the NEC Versa 6000 and connecting it to the docking station.
Powering on the NEC Versa.
The first time you use the NEC Docking Station 6000, you
Connect the AC power cable to the docking station and AC
Docking/Undocking the NEC Versa 2-1
Advertisement
Table of Contents
