Table of Contents
Advertisement
Operating Instructions
Setting
Default Gateway
(Static/DHCP Only)
DNS Server
Address
*1
(Static/DHCP Only)
Max. Bandwidth
Usage
Connection Type
If you automatically obtain the IP address from the DHCP server, you do not need to set it.
*1
40
•
If you have the assigned Default Gateway address by your
*1
ISP or network administrator, enter it in this data field.
•
Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
•
DNS server address is required in the following conditions.
–
Transferring images by E-mail or FTP
–
Setting products by their host names on the Multi-
Camera Setup page
–
Using the DynamicDNS service
–
Using the alarm log notification
•
If you have the assigned DNS server addresses by your
ISP or network administrator, enter them in this data field.
They usually have two addresses.
•
Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
•
The bandwidth can be restricted.
•
Select the maximum bandwidth usage from [Unlimited] to
[0.1 Mbps].
•
This setting is valid in both IPv4/IPv6.
Note
Set the maximum bandwidth usage seeing the following
file sizes. These are examples for a JPEG file with a
standard image quality. File sizes may change depending
on the image quality or how bright the object is.
160 × 120 pixels: About 3.5 KB (28 Kbit)
320 × 240 pixels: About 10 KB (80 Kbit)
640 × 480 pixels: About 18 KB (144 Kbit)
•
Select [Auto Negotiation] normally. If you cannot access
this product, see page 7 of the Troubleshooting on the
Setup CD-ROM.
•
This setting is valid in both IPv4/IPv6.
Description
Advertisement
Table of Contents
