Table of Contents
Advertisement
2.25 Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm
Log, set Alarm or Motion Detection for Trigger Setting and check [Enable].
1.
Click [Alarm Log] on the Setup page.
2.
Set each parameter.
3.
Click [Save] to save the settings.
•
Clicking [Cancel] cancels your settings without saving changes.
4.
Click [Go to Alarm Log page].
•
The Alarm Log page is displayed.
Note
If you change a setup of operation and click [Save], new alarm logs are
deleted.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
121
Advertisement
Table of Contents
