Table of Contents
Advertisement
Notes
•
When you do not know the IP address while setting [Automatic Setup] or
[DHCP Setup], you can search it by using the Setup Program (see page
155).
•
If this product is restarted, all buffered images on the internal memory are
deleted. The buffered images on the SD memory card are not deleted.
Setting
Allow Access from
the Internet
(Automatic Setup
Only)
Network
Configuration from
Setup Program
(Static/DHCP Only)
Port Number
(Static/DHCP Only)
•
IP address
•
Subnet Mask
(Static Only)
Host Name
(DHCP Only)
•
Allow Access from the Internet setting automatically configures
the router's Port Forwarding setting (some routers call it "Address
Translation", "Static IP Masquerade", "Virtual Server" or "Port
Mapping"). To enable Internet access to this product, check [Yes].
In this case, this product automatically searches the unused port
number on your network in the order from 50000 to 50050. To
disable Internet access to this product, check [No].
•
If you prohibit the Setup Program from changing the
network settings, clear the check box.
•
The port number is 80 by default. When you use multiple products
with a router on your network, each product must be assigned its
own port number (see page 57).
•
Do not set the following port numbers.
E.g., FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53, POP3: 110,
HTTPS: 443, ICQ: 4000 and IRC: 6661—6667.
•
Enter only the number (1—65535).
•
Some ISPs do not allow you to use port 80. Ask your ISP or network
administrator about the accessible port number over the Internet.
•
If your ISP or network administrator specifies the IP address and
subnet mask, enter them in each data field.
•
If you use this product on the LAN, set the IP address in the same
class as your PC (see page 154).
•
Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But
"0.0.0.0" and "255.255.255.255" are not available.
•
If your ISP uses the DHCP function which automatically
assigns the IP address to this product, enter the ISP-
assigned host name. (Host name may be used as an
authentication.)
•
Enter ASCII characters for the host name (see page 163).
But [Space], ["], ['], [&], [<] and [>] are not available.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
39
Advertisement
Table of Contents
