40、 Failsafe; 41、 Warning - Microzone 8B-MINI Product Manual

DIGITAL PROPORTIONAL R/C
SYSTEM
FailSafe:
It works when the receiver can't receive the signal from the remote control normally, and it works when the
remote control is turned off and the distance exceeds the signal range that the receiver can receive, and it
returns to the set runaway protection value when it can't receive the signal to protect the model from being
hurt, and this value needs to be set according to the characteristics of the controlled machine, such as a
vehicle / boat, the fuel channel can be set to 1500us, in this way, when the motorcycle or boat goes out of
control, it will stay in the current position;
Setting method: Make sure the receiver and the remote control have been aligned to the frequency, press
<UP> key or <DOWN> key to select the corresponding channel, then press <MENU> key to determine the
channel that needs to be modified, then press <UP> key or <DOWN> key to modify the parameter, and then
press <MENU> key to complete the process. After the setting is completed, to ensure the correctness of the
setting, please take the initiative to turn off the remote control in order to test the result of the setting (before
turning off the remote control Please pay attention to safety, such as whether the propeller has been
dismantled or not);
Receiver M-BUS / MC3RB / MC4RB / MC6RE / MC7RB / MC8RE / E6R-E / MC9002 do not support runaway
protection.
Warning:
When the receiver return voltage is lower than the model voltage set by the remote control, it will tick, and
the model voltage value in the main page is red and blinking, and there is no alarm when the model voltage
is set to 0V;
Press <MENU> key, then press <UP> key or <DOWN> key to modify the model voltage value, then press
<MENU> key to finish.
www.microzone.cn
2.4GHz
FHSS
-22-