Page 3
Introduction Thank you for purchasing MC6S from Microzone,please carefully read all this instruction before you start to use it.Meantime,please keep this instruction carefully for further possible guide in the future. Warning About usage and change on this product. 1.This model is only used for Hobby flight.
5.Please check ever y ser vo works properly and eliminate any interfering signal before you fly with it. 6.All the Microzone radios are only compatible with Microzone receivers, couldnot be compatible with other brands’.
Product Specification MC6S MC6S Digital trim Transmitter function 1.Application: Helicopter, airplane, car ,boat 2.Big Dot matrix LCD display, resolution 128*64 3.Frequency: 2401.5MHz~2445.5MHz 4.Power : <100mW 5.Working current: <120mA 6.Type: PCM1024 7.Trim: Digital Trim 8.Comfortable menu design, easier to use and setup 9.New joystick design, adjustable tightness and height...
Transmitter controls Antenna Switch2 Switch 4 Switch1 Switch 3 Throttle Elevator Trim Trim Elevator Aileron/ Rudder Throttle Hook Rudder Trim Aileron Trim + Key MENU Key Power switch - Key END Key LCD Display...
Display instruction Airplane 1.Switch on, press MENU button to main menu, press +/- to choose different title.。 MENU MENU END/EXIT END/EXIT Main menu Menu 2.Choose MODEL sub-menu with +/- buttons, Press MENU button to enter sub menu, choose any mode with +/- buttons, press MENU button to confirm it, Press END button to return main menu.
Page 8
Display instruction Airplane 6.Choose SUB-TRIM sub-menu with +/- buttons, Press MENU button to enter sub menu, choose any title with +/- buttons, press MENU button to confirm chosen title, setup parameters with +/- buttons, press END to return main menu. MENU MENU MENU...
Page 9
Display instruction Helicopter 1.Switch on, press MENU button to main menu, press +/- to choose diferent title. MENU MENU END/EXIT END/EXIT Main menu Menu 2.Choose MODEL sub-menu with +/- buttons, Press MENU button to enter sub menu, choose any mode with +/- buttons, press MENU button to confirm it, Press END button to return main menu.
Page 10
Display instruction Helicopter 6.Choose SUB-TRIM sub-menu with +/- buttons, Press MENU button to enter sub menu, choose any title with +/- buttons, press MENU button to confirm chosen title, setup parameters with +/- buttons, press END to return main menu. MENU MENU MENU...
Page 11
Display instruction Helicopter 11.Choose sub-menu with +/- buttons, Press MENU button to enter sub menu, choose any title with +/- buttons, press MENU button to confirm chosen title, setup parameters with +/- buttons, press END to return main menu. MENU MENU MENU END/EXIT...
Need help?
Do you have a question about the MC6S and is the answer not in the manual?
Questions and answers