Series 8; Programme Selector - Electrolux 6 Series Service Manual

Hide thumbs Also See for 6 Series:

Table of Contents

4.3 Series 8

1. 16 position programme selector dial

2. On/Off button button

3. LCD display

4. Function button

The selector dial fitted on series 8 is referred to as the HI-FI selector and it is used to select the desired

washing programme; it can be turned both clockwise as well as anti-clockwise.

There are 16 selector positions available, and they can all be configured.

Compared to a traditional selector dial (see series 6), the Hi-fi selector does not have an index on the dial

or a reset position, the dial itself does not indicate a position on the control panel, but instead allows the

selected programme to beindicated bu lighting a LED associated with the programme.

To reset a cycle in progress, simply press the On/Off button.

When the appliance is turned on, the first position at the top right is selected by default (except in special

circumstances, for instance, if there is a power failure).

When the selector dial is turned clockwise or anti-clockwise, the corresponding LED associated with a

programme lights up and the LCD display shows the time required for drying and the programme

phases concerned.

Technical Support - A.D.L.

5. Start/Pause button

6. Start (lit continuously) Pause (flashing) LED

7. Programme LEDs

34/76

599 74 12-74 Rev.01

Table of Contents

7 series 8 series 9 series