6.7.1 Control board
Loosen the 9 fastening screws on the board.
Using a screwdriver unhook the 10 fixing clips
and simultaneously lift up the whole board unit
until it has been completely removed.
6.7.2 Programme selector know series 6
Press the 4 anchoring clips inwards and
simultaneously push the handle outwards.
6.7.3 Programme selector know series 7-8-9
With the aid of a screwdriver press the three
locking clips on the know cover inwards.
Simultaneously pull the knob cover until it is
completely removed.
Technical Support - A.D.L.
31/66
599 74 32-54 Rev.01