Time-Controlled Drying - Electrolux 6 Series Service Manual


Reverse Plus
This option is not enabled on all programmes. When this option is selected the drum turns in the opposite
direction more frequently that it would in a normal cycle, thus preventing the washing from becoming
too tangled.
After selecting this option, the display shows the following icon

Long anti-crease
This option is not enabled on all programmes and it prolongs the final anti-crease phase by 60 minutes,
thereby extending the amount of time required for the anti-crease phase to 90 minutes [30 minutes
(default) + 60 minutes (option)].
If you select a programme where the anti-crease cycle is enabled, the
if the long anti-crease button is pressed, the display will show

Acoustic signal (buzzer)
This option enables or disables the buzzer sound permanently even after the machine is turned off or
following a programme change.
When the alarm is enabled (default configuration), the LED associated with the key is lit.

4.2.4 Time-controlled drying

Select the time-controlled programme on the selector dial in order to set the desired drying time by pressing
the TIME button.
When the TIME button is pressed, the corresponding LED is lit and each time the button is pressed or if the
button is held own, the time increases in 10-minute steps, from a minimum of 10 minutes to a maximum of
120 minutes (2 hours).
If you reach the maximum time, the next step resets the timer to 0 (zero).
Technical Support - A.D.L.
.
.
25/76
icon is displayed;
599 74 12-74 Rev.01