Delay Start - Electrolux 6 Series Service Manual

4.4.7 Delay start

Touch this button to postpone the selected programme start.
After touching the touchkey once the line of text shows the message NO DELAYED START and the time
indicated on the display remains unchanged, that is to say the total of the current time plus the cycle time.
Current time cycle time 1:30 the display shows
On touching the touchkey a second time the line of text shows the message END OF CYCLE and the time
indicated on the display changes by half an hour, that is to say to indicate the total of the current time plus
the cycle time plus the delay set.
Current time cycle time 1:30
When the touchkey is touched again the time will increase by a further 30 minutes.
Current time cycle time 1:30
When the touchkey is touched again there will be another half hour increase and so on until reaching
10 hours, after which the increases become of one hour up to a maximum of 23 hours.
After selecting the time, press Start/Pause to start the countdown, the line of text displays the message
DELAYED START while the clock on the right indicates the time remaining before start of the cycle.
Technical Support - A.D.L.
.
30 minute delay set the display shows
1 hour delay set the display shows
53/76
.
.
599 74 12-74 Rev.01