Inverter Reset - Mitsubishi Electric 800 Series Instruction Manual

4.4

Inverter reset

Operation conditions of inverter reset
Which resetting method is allowed or not allowed in each operation mode is described below.
Inverter reset (Refer to
Reset from the
Error reset (STW (bit 7)) at inverter fault
network
(Refer to
Turn on the inverter RES signal (terminal RES)
Switch off inverter power
Inverter reset
Reset from the PU/
DU
Reset at inverter fault
*1 Inverter reset can be made any time.
*2 Reset can be made only when the protective function of the inverter is activated. (Available with PPO type 1 to 5 only)
*3 The same operation is performed regardless of the setting value.
34
INVERTER SETTING
Resetting method
*1
page 62.)
*2
page 54.)
Network
operation
Allowed
Pr.349 = 0,
100, 1000,
1100, 10000,
10100, 11000,
*3
11100
Allowed
Pr.349 = 1,
101, 1001,
1101, 10001,
10101, 11001,
*3
11101
Allowed
Allowed
Allowed
Allowed
Operation mode
External
PU operation
operation
Disallowed Disallowed
Allowed Allowed
Disallowed Disallowed
Allowed Allowed
Allowed Allowed
Allowed Allowed
Allowed Allowed