Toshiba 13A24 Owner's Manual page 8

÷
SETTING THE LANGUAGE
This TV can display the on-screen displays and adiustment menus in English, Spanish, or French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select
the language you prefer first, then proceed with the other menu options.
÷
[_ Press MENU. I MENU
II CH SETUP
\IIsPICTURE
-- II LANGUAGE
Sl_ V'CHIP SET
] Press SET + or - to select the m LOCK
II ON TIMER
LANGUAGE mode, then press (+/-/ENTER/MENU)
ENTER,
[]
Press SET + or - until the " _ "
indicator points to the desired
language: English (ENGLISH),
Spanish (ESPANOL) or French
(FRANCAIS), then press ENTER,
LANGUAGE / IDIOMA,' LANGUE
• ENGLISH
ESPANOL
FRANCAIS
t +/ - / ENTER/ MENU)
[_ Press MENU untilthe
repeatedly
menu screen is cleared.
NOTE:
If Spanish or French is chosen, the closed caption indicators will be in the selected language, but the closed caption text
will not be affected by the language selection.
TV OPERATION
[_ To turn on the TV, press POWER. DIRECT CHANNEL SELECTION buttons (0-9) - Press
] The VOLUME be to desired level can
adjusted
a
by
pressing VOL (VOLUME) + or -.
ra
The sound level will be indicated on the TV screen by
GREEN BARS AND A NUMBER. As the sound level
increases, so do the number of BARS AND THE
NUMBER on the screen. The same is true for decreas-
ing the level.
Set the TV/CABLE menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CABLE setting. See 'TO MEMORIZE
CHANNELS' on page 9.
TV - VHF/UHF channels
CABLE - CABLE TV channels
@
OH (CHANNEL) + and - buttons
Press and release OH (CHANNEL) + or -. The
channel automatically stops at the next channel set
into memory. Press and hold the button down to
change channels more quickly.
For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS' on page 9.
1
these buttons to select a channel. The channel number will
appear on the upper right corner of the TV screen. If an
invalid channel number is selected, the display will revert to
the previous channel.
TV MODE DIRECT CHANNEL SELECTION - When the
TV/CABLE menu option is in the TV position, all channels
can be instantly selected by using two buttons (For example,
to select channel 2, press '0," then '2." If you press only '2,"
channel selection will be delayed for a few seconds). For
channels 10 and above, press the two digits in order.
CABLE mode direct channem selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
1-9
10-12
13-99
100-125
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
'002."
Press "0', then remaining 2 digits.
Example, to select channel 12, press
'012."
Press the 2 digits in order.
Example, to select channel 36, press
'36.'
Press the 3 digits in order.
Example, to select channel 120, press
'120,"
NOTE: If the station being viewed stops broadcasting, the TV
will automatically shut off after 15 minutes.
÷
8
3M 12701A-E P08-12
÷
5/2/04, 10:02