Table of Contents
Advertisement
displays an error message that the system has stopped functioning and must be turned off. Even after you turn off and
restart the system, the error message is displayed until the correct password is entered.
Delete or change system and setup password
Prerequisites
If the Password Status is set to Locked, you cannot delete or change an existing system or setup password.
Steps
1. To enter System Setup, press F2 immediately after turning on or restarting your system.
2. On the System Setup Main Menu screen, click System BIOS > System Security.
3. On the System Security screen, ensure that Password Status is set to Unlocked.
4. In the System Password field, alter or delete the existing system password, and then press Enter or Tab.
5. In the Setup Password field, alter or delete the existing setup password, and then press Enter or Tab.
If you change the system and setup password, a message prompts you to reenter the new password. If you delete the
system and setup password, a message prompts you to confirm the deletion.
6. Press Esc to return to the System BIOS screen. Press Esc again, and a message prompts you to save the changes.
7. Select Setup Password, change, or delete the existing setup password and press Enter or Tab.
NOTE:
If you change the system password or setup password, a message prompts you to reenter the new password. If
you delete the system password or setup password, a message prompts you to confirm the deletion.
Operate with setup password enabled
If Setup Password is set to Enabled, enter the correct setup password before modifying the system setup options.
If you do not enter the correct password in three attempts, the system displays the following message:
Invalid Password! Number of unsuccessful password attempts: <x> System Halted! Must
power down.
Even after you power off and restart the system, the error message is displayed until the correct password is entered. The
following options are exceptions:
● If System Password is not set to Enabled and is not locked through the Password Status option, you can assign a
system password. For more information, see the System Security Settings screen section.
● You cannot disable or change an existing system password.
NOTE:
You can use the password status option with the setup password option to protect the system password from
unauthorized changes.
Configure redundant operating system control
1. To view the Redundant OS Control screen, power on the system, and press F2.
2. Click System Setup Main Menu > System BIOS > Redundant OS Control.
3. Use the following table to configure redundant operating system control options:
Option
Redundant OS Location
28
Pre-operating system management applications
Description
Enables you to select a backup disk from the following devices:
● None
● SATA Ports in AHCI mode
● SATA ports
RAID configurations and NVMe cards are not included, as BIOS does not have the
ability to distinguish between individual drives in those configurations.
● BOSS PCIe Cards (Internal M.2 Drives)
● Internal USB
Advertisement
Table of Contents
