Table of Contents
Advertisement
20-
Quality
All Emax
2 Retrofill
circuit breakers
have
been
designed
and
manufactured
to ANSI
standards. The design was based on the original requirements of the legacy switchgear and
breakers. The product is manufactured in ABB Inc USA, Senotobia, Missisipi (MS) and is
inspected using some of the same master gauges used on the legacy AK, AKR breakers to
confirm electrical and mechanical performance, including rejections-features.
21-
Information Label
On the front of each circuit breaker there is a factory-assembled
label that details all
electrical accessories included on the circuit breaker.
22-
Product and Catalog Serial Numbers
Product catalog and serial numbers should be kept handy when communicating about the
circuit breaker. Each circuit breaker has a unique serial number (S/N) located on the front
fascia.
23-
Remove Circuit Breaker from Container
Inspectand
1.
Prepare
2.
Inspect the shipping container for obvious signs of rough handling and/or external
damage incurred during transportation.
Record any observed damage for reporting to the carrier. Ensure all recorded reports
and claims include the order number and name plate information.
Remove the banding straps and lift the top cover.
Remove all packaging material.
Remove all product documentation and store properly.
Unscrew the mounting screws that fasten the circuit breaker to the bottom of the
shipping pallet and remove the circuit breaker.
Remove the two shipping brackets and discard them.
Use Lifting Device
1.
Use a lifting device for moving circuit breaker in order to avoid personal injury and
damaging
the breaker.
Use a proper overhead lifting device to mount breaker into the switchgear. Contact the
nearest sales office for availability of a hoisting device.
2TSA451009P0000 Rev-B
©2020 Emax 2 Retrofill Circuit Breakers 800-5000A | 23
Advertisement
Table of Contents
