Servicing The Engine Oil - Toro Z Master Professional 6000 Series Operator's Manual

With 60in or 72in turbo force side discharge mower

Hide thumbs Also See for Z Master Professional 6000 Series:

Operator's manual (80 pages)

Setup instructions (16 pages)

Operator's manual (68 pages)

Table Of Contents

Table of Contents

Figure 45

1. Air-cleaner body

2. Inner air filter

3. Primary air filter

Servicing the Primary Filter

•

If the primary filter is dirty, bent, or damaged, replace it.

•

Do not clean the primary filter.

Servicing the Inner Filter

Replace the inner filter, never clean it.

Important: Never attempt to clean the safety filter.

If the safety filter is dirty, then the primary filter is

damaged. Replace both filters.

Installing the Filters

Important: To prevent engine damage, always operate

the engine with both air filters and cover installed.

1. If installing new filters, check each filter for shipping

damage.

Note: Do not use a damaged filter.

2. If the inner filter is being replaced, carefully slide it into

the filter body (Figure 45).

3. Carefully slide the primary filter over the inner filter

(Figure 45).

Note: Ensure that the primary filter is fully seated by

pushing on its outer rim while installing it.

Important: Do not press on the soft inside area

of the filter.

4. Position the air-cleaner cover, so that the breather valve

does not interfere with the throttle mechanism (Figure

46).

4. Air-cleaner latch

5. Air-cleaner cover

1. Air-cleaner cover

2. Throttle mechanism

5. Secure the cover with the latches (Figure 45).