Advertisement
(3) 8 pin jack positioning, lead bending and
5
soldering
(theprojection) into cose
contact with the PWB.
it
5
3:
Ri
He
gl:
Do not
allow
floats
Lead bending (use radio pliers to
bend without deforming the PWB.)
x Soldering temperature should be Max. 320°C (within 5 sec).
* If there is a float, the 8 pin cable cannot be inserted under the set
state.
* Soldering is made in 11 positions.
(4) 2 pin jack positioning and soldering
(Note) Attach the parts closely
"The pins should be firmly
inserted into the hole in
the PWB.
(NG)
any
Clearance.
Do not
allow
| % Soldering temperature should be Max. 320°C (within 5 sec).
If there is a float, the 2 pin cable cannot be inserted under the set
state.
(5) Power ON/OFF switch positioning and soldering
x If there is a float, the power ON/OFF control may be malfunction
under the set state.
(Insertion state)
There
shouldbe
no clearance
(Back)
[x Soldering temperature should be Max. 320°C (within 5 sec).
Advertisement
