Advertisement
CHAPTER 4. DISASSEMBLY AND
ASSEMBLY
1. Remove dummy card unit ©, pen unit @, and battery cover unit
@ trom the main body. Remove screw blind sheet @.
(1) Dummy card unit removal
Open and close the lock of the eject unit as shown below:
C7)
<) il
(Locked state)
(Locked release state)
(2) Remove the screw blind sheet at the side of the card insertion
hole.
he
2. Remove the screws from the lower cabinet.
(®2 pes.
®3 pes.. © 2 pes.. © 1 pc.: Total 8 pes.)
Remove the IR filter A. (Between chassis A and the lower cabinet.)
<Note> When attaching the screws, attach in the sequence of ®,
©,@, and ©.
Advertisement
