Manual Intercom; Dial Intercom - NEC UNIVERGE SV9300 User Manual

TO ANSWER
1.
While hearing ringing tone,
Automatic Intercom feature key lamp
flashes green. →
Voice Call alert tone is heard.
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
2.
Press Automatic Intercom feature
key.
Automatic Intercom feature key lamp
lights green. →
3.
Press Speaker key.
Speaker key lamp lights red. →

MANUAL INTERCOM

The Manual Intercom groups have up to six
terminals sharing a common signal path. Users
can call other members of the Manual Intercom
group by pressing a Manual Intercom feature
key; each press sends a tone burst over the
speakers of all the terminals in the group. When
another user answers the call a speech path is
activated.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO INITIATE
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Press Manual Intercom feature key.
You will receive a ringback tone.
200
HIST. >>>>
86
FEATURE OPERATION
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
3.
Each press of Manual Intercom
feature key sends tone bursts.
TO ANSWER
1.
While hearing ringing tone,
Manual Intercom feature key lamp flashes
green. →
You may receive a ring tone.
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
2.
Press Manual Intercom feature key.
Manual Intercom feature key lamp lights
green. →
3.
Press Speaker key.
Speaker key lamp lights red. →
4.
If called terminal is engaged in a
non-intercom call, the terminal may
press Manual Intercom feature key
after placing original caller on hold
(with Hold key).

DIAL INTERCOM

Dial Intercom comprises up to 10 terminals that
can call each other using a dedicated Dial
Intercom feature key with abbreviated dialing.
Dial Intercom calls can be voice announce with
ringing calls.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
201
HIST. >>>>
200
HIST. >>>>