NEC UNIVERGE SV9300 User Manual page 22

(1) Terminal
(2) LAN Cable
(3) LAN Cable connector for the premises
(4) LAN Cable connector for PC (PC Port)
(5) Groove
When disconnecting the AC adapter, disconnect it after removing the LAN cable.
When you connect the LAN cable to a PC, connect the LAN cable to the terminal's PC port
and the PC.
ATTACHING DIRECTORY CARD
The Directory Card can be used to record often dialed numbers or other important information.
Directory Card is option.
1.
Attach the Directory Card to the Directory Card Holder.
2.
Take the protective sheet off from the plastic cover.
The surface of the plastic cover is put out.
3.
Push the Directory Card Holder into the grooves on the terminal until they snap
into place.
(ITZ-12DG, ITZ-24DG)
14
INTRODUCTION